· 奥立龙支持专线:
13522443404(微信同步)
· Lovibond颜色分析支持专线:
13466566866(微信同步)
· 英国Grant支持专线:
19542068186(微信同步)
用于RT、CP和CPP的3 mm微调器
3mm Spinner for RT,CP and CPP
货号
类型
样品温度范围
备注
Z45666
旋转器 SB PLA (PCTFE)3 mm, 称为 Kel-F
纺纱机
Spinner SB PLA(PCTFE)3mm,called Kel-F Spinner
-40...+120℃
也用于 5 mm 反低温高盐浓度探针
Also used in 5 mm inverse CryoProbes when working withhigh salt comcentrations
Z179026
旋转轮 SB PLA (PCTFE)3 mm, 称为Kel-F旋转轮与泰坦棒
Spinner SB PLA(PCTFE)3mm,called Kel-F Spinner with titan sticks
-150...+150℃
用于超高频(UHF)测量的 3 mm 探 头的改进标准微调器,对于>1 GHz
现场强制要求
Z49727
微调器 SB 陶瓷 3 毫米
-150 ... +150
°C
/
Z45665
旋转杆 3 mm
Spinner POM 3mm
0...+80℃
樶高的冷冻探针的可能流量低于推荐的流量
Max.possible flow rate for CryoProbes is below the recommended one
Z105909
转轮 3 mm 绿色标签夹紧管 3 mm
Spinner 3mm green label for clamping the tube 3 mm
-80...+150℃
这个旋转器是一个 3mm的穿梭器,用于采样喷射的管道。该样品将在操作期间被引入。插入深度为11.. 20 毫米。
This Spinner is a 3mm shuttle for tubes used in the SampleJet.The sample will be introduced during operation.The insertion depth is 11...20mm.
Z179269
这个旋转器是一个 3 mm的穿梭器,用于样品的管道。样品将在操作过程中引入。插入深度为11 ……20 mm。
请注意事项!强制要求场n800mhzMHz。
NOTICE!Mandatory for field ≥800MHz.
京公网安备 11011502003124号